Hi,
Please find below the results of "dmesg" and "sysctl hw.sensors" commands on a new IBM x3250M3, MN: 4252-K3G.
This server comes with a ServeRaid M1015 SAS adapter and an Adaptec 1045 SAS adapter has been added to support an external tape library.
The ServRAID M1015 is based on LSISAS2008 chipset. See:
IBM Redbooks | ServeRAID M1015 SAS/SATA Controller for System x < http://www.redbooks.ibm.com/abstracts/tips0740.html> >
None of the SAS adapter is recognized by OpenBSD 5.0 snapshot 2011/08/17, running from an USB key to do these tests.
This server is now running Ubuntu 11.04 in production, but I may stop it and run OpenBSD to do some tests if it may help someone.
--
Laurent Salle
lsalle*******
--
OpenBSD 5.0 (GENERIC.MP) #63: Wed Aug 17 10:14:30 MDT 2011
deraadt*******
RTC BIOS diagnostic error 80<clock_battery>
real mem = 4248875008 (4052MB)
avail mem = 4121645056 (3930MB)
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.5 @ 0x7f6b9000 (53 entries)
bios0: vendor IBM Corp. version "-[GYE148AUS-1.11]-" date 02/09/2011
bios0: IBM 81Y7618
acpi0 at bios0: rev 2
acpi0: sleep states S0 S1 S5
acpi0: tables DSDT FACP TCPA APIC MCFG SLIC HPET SSDT SSDT ERST DMAR
acpi0: wakeup devices PCIB(S4) POP3(S4) POP1(S4) POP6(S4) POP5(S4) PEX1(S4) PEX2(S4) PEX3(S4) PEX4(S4) PEX5(S4) EHI1(S3) EHI2(S3) PWRB(S3)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Xeon(R) CPU X3430 @ 2.40GHz, 2394.37 MHz
cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,POPCNT,NXE,LONG
cpu0: 256KB 64b/line 8-way L2 cache
cpu0: apic clock running at 132MHz
cpu1 at mainbus0: apid 2 (application processor)
cpu1: Intel(R) Xeon(R) CPU X3430 @ 2.40GHz, 2393.99 MHz
cpu1: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,POPCNT,NXE,LONG
cpu1: 256KB 64b/line 8-way L2 cache
cpu2 at mainbus0: apid 4 (application processor)
cpu2: Intel(R) Xeon(R) CPU X3430 @ 2.40GHz, 2393.99 MHz
cpu2: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,POPCNT,NXE,LONG
cpu2: 256KB 64b/line 8-way L2 cache
cpu3 at mainbus0: apid 6 (application processor)
cpu3: Intel(R) Xeon(R) CPU X3430 @ 2.40GHz, 2393.99 MHz
cpu3: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,POPCNT,NXE,LONG
cpu3: 256KB 64b/line 8-way L2 cache
ioapic0 at mainbus0: apid 8 pa 0xfec00000, version 20, 24 pins
acpimcfg0 at acpi0 addr 0x80000000, bus 0-255
acpihpet0 at acpi0: 14318179 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 36 (PCIB)
acpiprt2 at acpi0: bus 26 (POP3)
acpiprt3 at acpi0: bus -1 (POP1)
acpiprt4 at acpi0: bus -1 (POP6)
acpiprt5 at acpi0: bus 31 (POP5)
acpiprt6 at acpi0: bus 1 (PEX1)
acpiprt7 at acpi0: bus 6 (PEX2)
acpiprt8 at acpi0: bus 11 (PEX3)
acpiprt9 at acpi0: bus 16 (PEX4)
acpiprt10 at acpi0: bus 21 (PEX5)
acpicpu0 at acpi0: PSS
acpicpu1 at acpi0: PSS
acpicpu2 at acpi0: PSS
acpicpu3 at acpi0: PSS
acpibtn0 at acpi0: PWRB
ipmi at mainbus0 not configured
cpu0: Enhanced SpeedStep 2393 MHz: speeds: 2394, 2261, 2128, 1995, 1862, 1729, 1596, 1463, 1330, 1197 MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel Core DMI" rev 0x11
ppb0 at pci0 dev 3 function 0 "Intel Core PCIE" rev 0x11: msi
pci1 at ppb0 bus 26
vendor "Adaptec", unknown product 0x0450 (class mass storage subclass SAS, rev 0x02) at pci1 dev 0 function 0 not configured
ppb1 at pci0 dev 5 function 0 "Intel Core PCIE" rev 0x11: msi
pci2 at ppb1 bus 31
vendor "Symbios Logic", unknown product 0x0073 (class mass storage subclass RAID, rev 0x03) at pci2 dev 0 function 0 not configured
"Intel Core Management" rev 0x11 at pci0 dev 8 function 0 not configured
"Intel Core Scratch" rev 0x11 at pci0 dev 8 function 1 not configured
"Intel Core Control" rev 0x11 at pci0 dev 8 function 2 not configured
"Intel Core Misc" rev 0x11 at pci0 dev 8 function 3 not configured
"Intel Core QPI Link" rev 0x11 at pci0 dev 16 function 0 not configured
"Intel Core QPI Routing" rev 0x11 at pci0 dev 16 function 1 not configured
ehci0 at pci0 dev 26 function 0 "Intel 3400 USB" rev 0x05: apic 8 int 19
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb2 at pci0 dev 28 function 0 "Intel 3400 PCIE" rev 0x05: msi
pci3 at ppb2 bus 1
ppb3 at pci0 dev 28 function 4 "Intel 3400 PCIE" rev 0x05: msi
pci4 at ppb3 bus 6
ppb4 at pci4 dev 0 function 0 unknown vendor 0x101b product 0x0452 rev 0x01
pci5 at ppb4 bus 7
vga1 at pci5 dev 0 function 0 vendor "Matrox", unknown product 0x0530 rev 0x00
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
ppb5 at pci0 dev 28 function 5 "Intel 3400 PCIE" rev 0x05: msi
pci6 at ppb5 bus 11
em0 at pci6 dev 0 function 0 "Intel PRO/1000 MT (82574L)" rev 0x00: msi, address 5c:f3:fc:29:ff:de
ppb6 at pci0 dev 28 function 6 "Intel 3400 PCIE" rev 0x05: msi
pci7 at ppb6 bus 16
ppb7 at pci0 dev 28 function 7 "Intel 3400 PCIE" rev 0x05: msi
pci8 at ppb7 bus 21
em1 at pci8 dev 0 function 0 "Intel PRO/1000 MT (82574L)" rev 0x00: msi, address 5c:f3:fc:29:ff:df
ehci1 at pci0 dev 29 function 0 "Intel 3400 USB" rev 0x05: apic 8 int 19
usb1 at ehci1: USB revision 2.0
uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb8 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0xa5
pci9 at ppb8 bus 36
pcib0 at pci0 dev 31 function 0 "Intel 3420 LPC" rev 0x05
pciide0 at pci0 dev 31 function 2 "Intel 3400 SATA" rev 0x05: DMA, channel 0 configured to native-PCI, channel 1 configured to native-PCI
pciide0: using apic 8 int 19 for native-PCI interrupt
ichiic0 at pci0 dev 31 function 3 "Intel 3400 SMBus" rev 0x05: apic 8 int 18
iic0 at ichiic0
sdtemp0 at iic0 addr 0x18: mcp98243
sdtemp1 at iic0 addr 0x1a: mcp98243
spdmem0 at iic0 addr 0x50: 2GB DDR3 SDRAM ECC PC3-10600 with thermal sensor
spdmem1 at iic0 addr 0x52: 2GB DDR3 SDRAM ECC PC3-10600 with thermal sensor
pciide1 at pci0 dev 31 function 5 "Intel 3400 SATA" rev 0x05: DMA, channel 0 wired to native-PCI, channel 1 wired to native-PCI
pciide1: using apic 8 int 18 for native-PCI interrupt
atapiscsi0 at pciide1 channel 0 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <HL-DT-ST, DVDRAM GT30N, IS09> ATAPI 5/cdrom removable
cd0(pciide1:0:0): using PIO mode 4, Ultra-DMA mode 5
isa0 at pcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
mtrr: Pentium Pro MTRR support
uhub2 at uhub0 port 1 "Intel Rate Matching Hub" rev 2.00/0.00 addr 2
cdce0 at uhub2 port 3 configuration 1 interface 0 "IBM RNDIS/CDC ETHER" rev 2.00/2.15 addr 3
cdce0: address 5e:f3:fc:29:ff:e1
uhub3 at uhub1 port 1 "Intel Rate Matching Hub" rev 2.00/0.00 addr 2
uhidev0 at uhub3 port 4 configuration 1 interface 0 "DELL Dell QuietKey Keyboard" rev 1.10/1.01 addr 3
uhidev0: iclass 3/1
ukbd0 at uhidev0: 8 modifier keys, 6 key codes
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
umass0 at uhub3 port 6 configuration 1 interface 0 " USB Flash Memory" rev 2.00/1.00 addr 4
umass0: using SCSI over Bulk-Only
scsibus1 at umass0: 2 targets, initiator 0
sd0 at scsibus1 targ 1 lun 0: <, USB Flash Memory, 1.00> SCSI2 0/direct removable serial.09306544708310641203
sd0: 960MB, 512 bytes/sector, 1967104 sectors
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
root on sd0a (a54a3d6515f3727c.a) swap on sd0b dump on sd0b
hw.sensors.cpu0.temp0=34.00 degC
hw.sensors.cpu1.temp0=34.00 degC
hw.sensors.cpu2.temp0=34.00 degC
hw.sensors.cpu3.temp0=34.00 degC
hw.sensors.sdtemp0.temp0=27.50 degC
hw.sensors.sdtemp1.temp0=27.75 degC
Please try this; run 'make' in sys/dev/pci after applying and
then build a kernel, then you can copy it to a usb stick and
see if it picks up the drives.
(SAS 9240 naming is from pci.ids).
Index: pcidevs
===================================================================
RCS file: /cvs/src/sys/dev/pci/pcidevs,v
retrieving revision 1.1619
diff -u -p -r1.1619 pcidevs
--- pcidevs 4 Sep 2011 09:26:05 -0000 1.1619
+++ pcidevs 6 Sep 2011 19:56:00 -0000
@@ -3915,6 +3915,7 @@ product SYMBIOS SAS2116_2 0x0065 SAS2116
product SYMBIOS SAS2308_3 0x006e SAS2308
product SYMBIOS SAS2004 0x0070 SAS2004
product SYMBIOS SAS2008 0x0072 SAS2008
+product SYMBIOS SAS9240 0x0073 SAS9240
product SYMBIOS SAS2108_3 0x0074 SAS2108
product SYMBIOS SAS2108_4 0x0076 SAS2108
product SYMBIOS SAS2108_5 0x0077 SAS2108
Index: mpii.c
===================================================================
RCS file: /cvs/src/sys/dev/pci/mpii.c,v
retrieving revision 1.48
diff -u -p -r1.48 mpii.c
--- mpii.c 29 Aug 2011 12:42:18 -0000 1.48
+++ mpii.c 6 Sep 2011 19:56:00 -0000
@@ -2098,7 +2098,8 @@ static const struct pci_matchid mpii_dev
{ PCI_VENDOR_SYMBIOS, PCI_PRODUCT_SYMBIOS_SAS2208_6 },
{ PCI_VENDOR_SYMBIOS, PCI_PRODUCT_SYMBIOS_SAS2308_1 },
{ PCI_VENDOR_SYMBIOS, PCI_PRODUCT_SYMBIOS_SAS2308_2 },
- { PCI_VENDOR_SYMBIOS, PCI_PRODUCT_SYMBIOS_SAS2308_3 }
+ { PCI_VENDOR_SYMBIOS, PCI_PRODUCT_SYMBIOS_SAS2308_3 },
+ { PCI_VENDOR_SYMBIOS, PCI_PRODUCT_SYMBIOS_SAS9240 }
};
int
ah, it's been pointed out this would be mfi(4).
Output from "pcidump -vxx" would probably be helpful..
Thanks.
I will do the requested tests tomorrow, and I will post the results on
Friday.
I've met many difficulties trying to install OpenBSD on an USB key on
sept. 7th. One USB key failed after a 2 hours OpenBSD setup (packages
setup was stalling). An another USB key allowed a quick setup, but I was
never able to get the server booting on it.
Finally, I ran out of time and needed to put the server back in
production with Ubuntu.
Please find below the output of "lspci -xvvv" running on Ubuntu. I hope
it will be useful, if not, sorry for the noise.
--
$lspci -xvvv
00:00.0 Host bridge: Intel Corporation Core Processor DMI (rev 11)
Subsystem: Intel Corporation Device 0000
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr+
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
00: 86 80 30 d1 40 01 10 00 11 00 00 06 00 00 00 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 86 80 00 00
30: 00 00 00 00 40 00 00 00 00 00 00 00 ff 00 00 00
00:03.0 PCI bridge: Intel Corporation Core Processor PCI Express Root
Port 1 (rev 11) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=1a, subordinate=1e, sec-latency=0
I/O behind bridge: 00004000-00004fff
Memory behind bridge: 91c00000-91cfffff
Prefetchable memory behind bridge: 0000000091e00000-0000000091efffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp
00: 86 80 38 d1 47 01 10 00 11 00 04 06 00 00 01 00
10: 00 00 00 00 00 00 00 00 00 1a 1e 00 40 40 00 00
20: c0 91 c0 91 e1 91 e1 91 00 00 00 00 00 00 00 00
30: 00 00 00 00 40 00 00 00 00 00 00 00 0a 01 03 00
00:05.0 PCI bridge: Intel Corporation Core Processor PCI Express Root
Port 3 (rev 11) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=1f, subordinate=23, sec-latency=0
I/O behind bridge: 00003000-00003fff
Memory behind bridge: 91b00000-91bfffff
Prefetchable memory behind bridge: 0000000091f00000-0000000091ffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp
00: 86 80 3a d1 47 01 10 00 11 00 04 06 00 00 01 00
10: 00 00 00 00 00 00 00 00 00 1f 23 00 30 30 00 00
20: b0 91 b0 91 f1 91 f1 91 00 00 00 00 00 00 00 00
30: 00 00 00 00 40 00 00 00 00 00 00 00 0b 01 03 00
00:08.0 System peripheral: Intel Corporation Core Processor System
Management Registers (rev 11)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
00: 86 80 55 d1 00 00 10 00 11 00 80 08 00 00 80 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 40 00 00 00 00 00 00 00 00 00 00 00
00:08.1 System peripheral: Intel Corporation Core Processor Semaphore
and Scratchpad Registers (rev 11)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
00: 86 80 56 d1 00 00 10 00 11 00 80 08 00 00 80 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 40 00 00 00 00 00 00 00 00 00 00 00
00:08.2 System peripheral: Intel Corporation Core Processor System
Control and Status Registers (rev 11)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
00: 86 80 57 d1 00 00 10 00 11 00 80 08 00 00 80 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 40 00 00 00 00 00 00 00 00 00 00 00
00:08.3 System peripheral: Intel Corporation Core Processor
Miscellaneous Registers (rev 11)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
00: 86 80 58 d1 00 00 00 00 11 00 80 08 00 00 80 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00:10.0 System peripheral: Intel Corporation Core Processor QPI Link
(rev 11)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
00: 86 80 50 d1 00 00 00 00 11 00 80 08 00 00 80 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00:10.1 System peripheral: Intel Corporation Core Processor QPI Routing
and Protocol Registers (rev 11)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
00: 86 80 51 d1 00 00 00 00 11 00 80 08 00 00 80 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00:1a.0 USB Controller: Intel Corporation 5 Series/3400 Series Chipset
USB2 Enhanced Host Controller (rev 05) (prog-if 20 [EHCI])
Subsystem: IBM Device 0377
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 19
Region 0: Memory at 91d01000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00: 86 80 3c 3b 46 01 90 02 05 20 03 0c 00 00 00 00
10: 00 10 d0 91 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 14 10 77 03
30: 00 00 00 00 50 00 00 00 00 00 00 00 0b 04 00 00
00:1c.0 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI
Express Root Port 1 (rev 05) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=01, subordinate=05, sec-latency=0
I/O behind bridge: 00006000-00006fff
Memory behind bridge: 92000000-921fffff
Prefetchable memory behind bridge: 0000000092200000-00000000923fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp
00: 86 80 42 3b 47 00 10 00 05 00 04 06 00 00 81 00
10: 00 00 00 00 00 00 00 00 00 01 05 00 60 60 00 00
20: 00 92 10 92 21 92 31 92 00 00 00 00 00 00 00 00
30: 00 00 00 00 40 00 00 00 00 00 00 00 05 01 03 00
00:1c.4 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI
Express Root Port 5 (rev 05) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=06, subordinate=0a, sec-latency=0
I/O behind bridge: 00007000-00007fff
Memory behind bridge: 91000000-918fffff
Prefetchable memory behind bridge: 0000000090000000-0000000090ffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp
00: 86 80 4a 3b 47 00 10 00 05 00 04 06 10 00 81 00
10: 00 00 00 00 00 00 00 00 00 06 0a 00 70 70 00 00
20: 00 91 80 91 01 90 f1 90 00 00 00 00 00 00 00 00
30: 00 00 00 00 40 00 00 00 00 00 00 00 05 01 0b 00
00:1c.5 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI
Express Root Port 6 (rev 05) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=0b, subordinate=0f, sec-latency=0
I/O behind bridge: 00002000-00002fff
Memory behind bridge: 91a00000-91afffff
Prefetchable memory behind bridge: 0000000092400000-00000000925fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp
00: 86 80 4c 3b 47 00 10 00 05 00 04 06 00 00 81 00
10: 00 00 00 00 00 00 00 00 00 0b 0f 00 20 20 00 00
20: a0 91 a0 91 41 92 51 92 00 00 00 00 00 00 00 00
30: 00 00 00 00 40 00 00 00 00 00 00 00 07 02 03 00
00:1c.6 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI
Express Root Port 7 (rev 05) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=10, subordinate=14, sec-latency=0
I/O behind bridge: 00008000-00008fff
Memory behind bridge: 92600000-927fffff
Prefetchable memory behind bridge: 0000000092800000-00000000929fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp
00: 86 80 4e 3b 47 00 10 00 05 00 04 06 00 00 81 00
10: 00 00 00 00 00 00 00 00 00 10 14 00 80 80 00 00
20: 60 92 70 92 81 92 91 92 00 00 00 00 00 00 00 00
30: 00 00 00 00 40 00 00 00 00 00 00 00 0a 03 03 00
00:1c.7 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI
Express Root Port 8 (rev 05) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=15, subordinate=19, sec-latency=0
I/O behind bridge: 00001000-00001fff
Memory behind bridge: 91900000-919fffff
Prefetchable memory behind bridge: 0000000092a00000-0000000092bfffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp
00: 86 80 50 3b 47 00 10 00 05 00 04 06 00 00 81 00
10: 00 00 00 00 00 00 00 00 00 15 19 00 10 10 00 00
20: 90 91 90 91 a1 92 b1 92 00 00 00 00 00 00 00 00
30: 00 00 00 00 40 00 00 00 00 00 00 00 0b 04 03 00
00:1d.0 USB Controller: Intel Corporation 5 Series/3400 Series Chipset
USB2 Enhanced Host Controller (rev 05) (prog-if 20 [EHCI])
Subsystem: IBM Device 0377
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 0: Memory at 91d00000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00: 86 80 34 3b 46 01 90 02 05 20 03 0c 00 00 00 00
10: 00 00 d0 91 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 14 10 77 03
30: 00 00 00 00 50 00 00 00 00 00 00 00 0b 02 00 00
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev a5) (prog-if
01 [Subtractive decode])
Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=24, subordinate=28, sec-latency=32
I/O behind bridge: 0000f000-00000fff
Memory behind bridge: fff00000-000fffff
Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00: 86 80 4e 24 44 01 10 00 a5 01 04 06 00 00 01 00
10: 00 00 00 00 00 00 00 00 00 24 28 20 f0 00 80 22
20: f0 ff 00 00 f1 ff 01 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 50 00 00 00 00 00 00 00 ff 00 03 00
00:1f.0 ISA bridge: Intel Corporation 3400 Series Chipset LPC Interface
Controller (rev 05)
Subsystem: IBM Device 0377
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel modules: iTCO_wdt
00: 86 80 14 3b 47 01 10 02 05 00 01 06 00 00 80 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 14 10 77 03
30: 00 00 00 00 e0 00 00 00 00 00 00 00 00 00 00 00
00:1f.2 IDE interface: Intel Corporation 5 Series/3400 Series Chipset 4
port SATA IDE Controller (rev 05) (prog-if 8f [Master SecP SecO PriP PriO])
Subsystem: IBM Device 0377
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 0: I/O ports at 5078 [size=8]
Region 1: I/O ports at 508c [size=4]
Region 2: I/O ports at 5070 [size=8]
Region 3: I/O ports at 5088 [size=4]
Region 4: I/O ports at 5050 [size=16]
Region 5: I/O ports at 5040 [size=16]
Capabilities: <access denied>
Kernel driver in use: ata_piix
00: 86 80 20 3b 47 00 b0 02 05 8f 01 01 00 00 00 00
10: 79 50 00 00 8d 50 00 00 71 50 00 00 89 50 00 00
20: 51 50 00 00 41 50 00 00 00 00 00 00 14 10 77 03
30: 00 00 00 00 70 00 00 00 00 00 00 00 0b 02 00 00
00:1f.3 SMBus: Intel Corporation 5 Series/3400 Series Chipset SMBus
Controller (rev 05)
Subsystem: IBM Device 0377
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr+
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 10
Region 0: Memory at 91d02000 (64-bit, non-prefetchable) [disabled]
[size=256]
Region 4: I/O ports at 5000 [disabled] [size=32]
Kernel modules: i2c-i801
00: 86 80 30 3b 40 01 80 02 05 00 05 0c 00 00 00 00
10: 04 20 d0 91 00 00 00 00 00 00 00 00 00 00 00 00
20: 01 50 00 00 00 00 00 00 00 00 00 00 14 10 77 03
30: 00 00 00 00 00 00 00 00 00 00 00 00 0a 03 00 00
00:1f.5 IDE interface: Intel Corporation 5 Series/3400 Series Chipset 2
port SATA IDE Controller (rev 05) (prog-if 85 [Master SecO PriO])
Subsystem: IBM Device 0377
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 18
Region 0: I/O ports at 5068 [size=8]
Region 1: I/O ports at 5084 [size=4]
Region 2: I/O ports at 5060 [size=8]
Region 3: I/O ports at 5080 [size=4]
Region 4: I/O ports at 5030 [size=16]
Region 5: I/O ports at 5020 [size=16]
Capabilities: <access denied>
Kernel driver in use: ata_piix
00: 86 80 26 3b 45 00 b0 02 05 85 01 01 00 00 00 00
10: 69 50 00 00 85 50 00 00 61 50 00 00 81 50 00 00
20: 31 50 00 00 21 50 00 00 00 00 00 00 14 10 77 03
30: 00 00 00 00 70 00 00 00 00 00 00 00 0a 01 00 00
06:00.0 PCI bridge: Vitesse Semiconductor VSC452 [SuperBMC] (rev 01)
(prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=06, secondary=07, subordinate=07, sec-latency=0
I/O behind bridge: 0000f000-00000fff
Memory behind bridge: 91000000-918fffff
Prefetchable memory behind bridge: 90000000-90ffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel modules: shpchp
00: 1b 10 52 04 47 00 10 00 01 00 04 06 00 00 01 00
10: 00 00 00 00 00 00 00 00 06 07 07 00 f0 00 00 00
20: 00 91 80 91 00 90 f0 90 00 00 00 00 00 00 00 00
30: 00 00 00 00 50 00 00 00 00 00 00 00 05 01 0b 00
07:00.0 VGA compatible controller: Matrox Graphics, Inc. MGA G200EV
(prog-if 00 [VGA controller])
Subsystem: IBM Device 0369
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (4000ns min, 8000ns max)
Interrupt: pin A routed to IRQ 0
Region 0: Memory at 90000000 (32-bit, prefetchable) [size=16M]
Region 1: Memory at 91800000 (32-bit, non-prefetchable) [size=16K]
Region 2: Memory at 91000000 (32-bit, non-prefetchable) [size=8M]
Expansion ROM at <unassigned> [disabled]
Capabilities: <access denied>
Kernel modules: matroxfb_base
00: 2b 10 30 05 07 00 90 02 00 00 00 03 00 40 00 00
10: 08 00 00 90 00 00 80 91 00 00 00 91 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 14 10 69 03
30: 00 00 00 00 dc 00 00 00 00 00 00 00 00 01 10 20
0b:00.0 Ethernet controller: Intel Corporation 82574L Gigabit Network
Connection
Subsystem: IBM Device 03bd
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 17
Region 0: Memory at 91a80000 (32-bit, non-prefetchable) [size=128K]
Region 1: Memory at 91a00000 (32-bit, non-prefetchable) [size=512K]
Region 2: I/O ports at 2000 [size=32]
Region 3: Memory at 91aa0000 (32-bit, non-prefetchable) [size=16K]
Expansion ROM at 92400000 [disabled] [size=256K]
Capabilities: <access denied>
Kernel driver in use: e1000e
Kernel modules: e1000e
00: 86 80 d3 10 47 04 10 00 00 00 00 02 10 00 00 00
10: 00 00 a8 91 00 00 a0 91 01 20 00 00 00 00 aa 91
20: 00 00 00 00 00 00 00 00 00 00 00 00 14 10 bd 03
30: 00 00 fc ff c8 00 00 00 00 00 00 00 07 01 00 00
15:00.0 Ethernet controller: Intel Corporation 82574L Gigabit Network
Connection
Subsystem: IBM Device 03bd
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 19
Region 0: Memory at 91980000 (32-bit, non-prefetchable) [size=128K]
Region 1: Memory at 91900000 (32-bit, non-prefetchable) [size=512K]
Region 2: I/O ports at 1000 [size=32]
Region 3: Memory at 919a0000 (32-bit, non-prefetchable) [size=16K]
Expansion ROM at 92a00000 [disabled] [size=256K]
Capabilities: <access denied>
Kernel driver in use: e1000e
Kernel modules: e1000e
00: 86 80 d3 10 47 04 10 00 00 00 00 02 10 00 00 00
10: 00 00 98 91 00 00 90 91 01 10 00 00 00 00 9a 91
20: 00 00 00 00 00 00 00 00 00 00 00 00 14 10 bd 03
30: 00 00 fc ff c8 00 00 00 00 00 00 00 0b 01 00 00
1a:00.0 Serial Attached SCSI controller: Adaptec ASC-1405 Unified Serial
HBA (rev 02)
Subsystem: Marvell Technology Group Ltd. Device 6440
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Region 2: I/O ports at 4000 [size=128]
Region 4: Memory at 91c00000 (64-bit, non-prefetchable) [size=4K]
Expansion ROM at 91e00000 [disabled] [size=256K]
Capabilities: <access denied>
Kernel driver in use: mvsas
Kernel modules: mvsas
00: 05 90 50 04 47 00 10 00 02 00 07 01 10 00 00 00
10: 00 00 00 00 00 00 00 00 01 40 00 00 00 00 00 00
20: 04 00 c0 91 00 00 00 00 00 00 00 00 ab 11 40 64
30: 00 00 fc ff 48 00 00 00 00 00 00 00 0a 01 00 00
1f:00.0 RAID bus controller: LSI Logic / Symbios Logic MegaRAID SAS 9240
(rev 03)
Subsystem: IBM ServeRAID M1015 SAS/SATA Controller
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Region 0: I/O ports at 3000 [size=256]
Region 1: Memory at 91b40000 (64-bit, non-prefetchable) [size=16K]
Region 3: Memory at 91b00000 (64-bit, non-prefetchable) [size=256K]
Expansion ROM at 91f00000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: megaraid_sas
Kernel modules: megaraid_sas
00: 00 10 73 00 47 04 10 00 03 00 04 01 10 00 00 00
10: 01 30 00 00 04 00 b4 91 00 00 00 00 04 00 b0 91
20: 00 00 00 00 00 00 00 00 00 00 00 00 14 10 b1 03
30: 00 00 fe ff 50 00 00 00 00 00 00 00 0b 01 00 00
Post a Comment
